Nonlinear vibration response of a complex aeroengine under the rubbing fault

Nonlinear Dynamics - Rolling bearing and squeeze film damper will introduce structural nonlinearity into the dynamic model of aeroengine. Rubbing will occur due to the clearance reduction design of...     

Flower-like titanium dioxide as novel co-reaction accelerator for ultrasensitive “off–on” electrochemiluminescence aptasensor construction based on 2D g-C3N4 layer for thrombin detection

Journal of Solid State Electrochemistry - An ultrasensitive “signal-off–on” electrochemiluminescence (ECL) biosensor is constructed based on f1-TiO2/g-C3N4/PDA for thrombin...     

Evolution detection of phenol by pristine BN nanocone: chemical quantum study

Structural Chemistry - In order to evaluate the electrical response of boron nitride nanocones (BNNCs) to phenol gas, density functional theory (DFT) calculations are employed. The sensitivity and...     

Excellent UV-absorbing cotton fabric with high durability and hydrophobicity based on surface-initiated ATRP of polymerizable organic UV-absorber

Cellulose - Ultraviolet (UV) protective cotton fabric is a convenient and reliable way to protect human body from sunlight. Herein, a polymerizable UV-absorber,...     

Trajectory stabilization control for aerial recovery of cable-drogue-UAV assembly

Unmanned aerial vehicles (UAVs) aerial recovery denotes the technology that UAVs are recovered in the air by the transport aircraft for reuse. During the recovery process, the multiple wind perturbations and fast-changing UAV’s engine shutdown will induce oscillations in the cable-drogue-UAV assembly (CDUA) with strong nonlinearities and tight coupling, which affects the safety and speed of the UAV aerial recovery. Aiming at this problem, this paper proposes a non-constraining force direction (NCFD)-based CDUA anti-disturbance trajectory control method for the first time. First, by transforming the CDUA trajectory control to the NCFD control, the coupling and nonlinear effects in the CDUA can be reduced, and the fast-changing disturbances caused by the engine shutdown can be compensated. Then, feed forward control is designed based on the relationship between the NCFD and cable shape, which is established based on the cable dynamics, to improve the response speed. Furthermore, a fixed-time anti-disturbance controller (FTADC) is designed for the flow angle of drogue-UAV assembly (DUA) given by the NCFD controller and compensates for the effects of wind and parameter perturbations. Finally, the stability of the proposed method is analyzed, and the effectiveness is demonstrated by abundant simulations.

     

Two Dimensional Locally Resonance Phononic Crystals for the Reduction of Vibration and Noise in Wheel-driven Bus

Acoustical Physics - In order to suppress the vibration and noise in the middle and low frequency band of the wheel-driven bus, this paper explores the application of the locally resonant phononic...     

Effect of phosphorus (P) on the structure and reactivity of biochars produced from the pyrolysis of acid-washed biomass loaded with P of various forms

This paper investigates the effect of phosphorus (P) on char structure and reactivity of char prepared from the fast pyrolysis of purposely-prepared P-loaded biomass samples at 1000 °C in absence of other inorganic species. Biomass was first acid-washed then loaded with P of three different occurrence forms (one organic P i.e. phytic acid, and two inorganic P i.e. orthophosphoric acid and polyphosphoric acid) at the same P content of 0.8 wt%. Experimental results show that both organic and inorganic P substantially increase char yields during pyrolysis from 6.2% for the biomass sample without P to 23.0–26.0% for P-loaded samples due to the enhanced crosslinking by P-containing structures in char, leading to increases in the char C and H contents and decrease in O content. The presence of P in biochars from fast pyrolysis of various P-loaded biomass samples plays important role in the evolution of char structure and intrinsic reactivity measured during low-temperature oxidation at 500 °C in air under chemical-reaction-controlled regime. After pyrolysis and subsequent char oxidation, all P in biomass either as organic or inorganic P are found to be present in forms of acid-insoluble organic structures. For char prepared from acid-washed wood, char reactivity increases with char conversion due to the increasing pore surface area at higher conversion. Comparatively, for char prepared from acid-washed wood loaded with various P at char conversion below 60%, the presence of P increases char intrinsic reactivity due to the enhanced crosslinking of reactive carbon structures and reduced condensation of char structures. However, at conversions above 60%, P-containing species in char lead to a significant decrease in char reactivity, due to the formation of abundant CO-P bonds, that is highly resistant to the oxidation in air, in the reacting chars.     

Quantifying the quantumness of ensembles via generalized α-z-relative rényi entropy

International Journal of Theoretical Physics - Quantifying the quantumness of ensembles is a vital and practical task in quantum information theory. In this paper, we quantify the quantumness of...     

吸收波长和吸收效率可控的超材料吸收器

为了使超材料完美吸收器(metamaterial perfect absorber,MPA)能够同时实现吸收效率和吸收波长的控制,本文提出利用二氧化钒(VO2)和石墨烯作为MPA的材料,通过对MPA的结构设计,在红外波段实现了高吸收,吸收效率最高可达99%.研究发现通过改变VO2的温度和石墨烯的化学势,可同时实现MPA吸收效率和吸收波长的控制,吸收效率调制深度和吸收波长调谐范围分别可达97.08%和3.2μm.通过对MPA在吸收波长处的磁场分布分析可以得出,MPA能够产生高吸收是由于其形成了法布里-帕罗(Fabry-Pérot,FP)干涉腔共振,研究发现MPA的结构参数对FP腔的共振波长具有显著的影响.